Kildareman a écrit : 18 août 2023, 16:39
lolesio a écrit : 11 août 2023, 12:18
Bonjour, peut être un plan et la référence du kit ?
Hi, may be you could share your electrical plan and the ref of your kit?
Sure.
It is a:
Custom Dynamics 4- Way Hazard Kit For Metric Motorcycles (4WAYHAZARDKIT)
I got it from ARH Customs in the UK.
Because the 850 V7 feeds each indicator into the instruments you have to add a piggyback wire from each indicator to the new indicator relay from the kit.
You could simplify the circuit by only using one diode rather than the two supplied.
I fitted a hidden switch as I used a permanent live in my eastern beaver fuse block
I found an easier way to achieve 4 way flashers / hazard flashers.
Not my idea as I found it somewhere on the internet. On the schematic plug 61 - a three way plug with Yellow, Blue & Orange wires - for accessory alarm.
If you bridge the Yellow & Blue wires with a momentary button you have hazard flashers. Just press the button and hazards start.
Even better you can then turn the ignition off and they continue to flash. Turning the ignition back on cancels them.
The plug lives under the tank about half way along.
